Dryer exhaust gas treatment VIA cooperates with Runda to achieve cyclone dust collector cooperation

After repeated discussions in several months, the technical plan of Yantai Wei'ao Industrial Co., Ltd. was finally recognized by the Yantai Runda Wastewater Environmental Protection Co., Ltd. at various levels. On December 4, 2014, the two parties signed a contract and began formal cooperation. .

Runda dryer exhaust gas treatment requirements

Yantai Runda Garbage Treatment & Environmental Protection Co., Ltd. is a high-tech enterprise integrating research and development of urban living garbage treatment technology, manufacturing of complete sets of garbage disposal equipment, and construction of urban waste comprehensive treatment plants. It was established in January 2000 with a registered capital of 48.65 million yuan. The scale of assets reached 300 million yuan.

The cooperation between the two parties stems from the fact that Runda has a sludge dryer. The exhaust gas after drying is destined to be treated by a cyclone. In addition, there is sludge residue in the exhaust gas at that time. Considering the gas condensation, these residues will adhere to the wall. At the top, I wanted to add a layer of steam to the outside of the cyclone to keep the temperature inside the dust collector at 120 degrees.

After a variety of communication, Weiou Industry Co., Ltd. is responsible for the design, manufacture and installation of the cyclone separator for the export of the exhaust gas from the dryer, including the transformation of the inlet and outlet pipelines, the insulation pipelines and valves, and the insulation and support of the equipment. The specific requirements are based on the site conditions. Industrial provides installation drawings, which are executed after signing and verification by Runda.

A brief description of the selection of cyclone separators

According to the data provided by Runda and the actual situation on the site, the selection of Weilu Industrial Dust Collector is briefly described as follows:

The KLP/A-8.0 cyclone dust collector was recommended for this. The dust collector is in the form of tangential air intake and the airflow distribution is more uniform. The main structure consists of: Simplified, vertebral body, intake and exhaust, etc. The structure is simple, operation is safe, easy to install and maintain, investment and operating costs are low; the main working principle is to use tangential inlet, then The rotation of the air flow, the action of centrifugal force, and the dust particles of 0.3 μm or more, flow along the wall of the cyclone dust collector. Under the action of gravity, the dust gradually slides to the bottom of the vertebral body, thus completing the separation of the dust. The purpose of dust removal.

In order to ensure that there will be no sludge deposits on the inner wall, two 0.25 kW rapping motors are added to the outer wall of the dust collector to prevent dusting of the inner wall by vibration.

In order to ensure that the steam temperature inside the precipitator is controlled at 100°C-110°C, the insulation pipe is tightly wound around the outer wall of the precipitator. The DN20 carbon steel boiler tube is selected. The pipeline heat source is 0.5 MPa high-temperature steam and passes through the steam through the pipeline. Release heat to provide heat to the duster.

The ash removal method uses an automatic unloading valve for processing.

Rich experience in environmental protection dust removal renovation project, welcome all kinds of cooperation

With a professional and efficient sales team and service team, strong technical strength and financial strength, within one year of establishment, the company has successively established good cooperative relations with many large enterprises, such as:

ZF ZF steering system (Yantai) Co., Ltd.

Li Po Xiang (Yantai) Auto Parts Manufacturing Co., Ltd.

Yanyantai Nameishi Electronic Material Co., Ltd.

Yanyantai Huaxin Stainless Steel Co., Ltd.

Sanonda Group

Yantai Taiwan Jiezhong Automobile Parts Co., Ltd.

 Shandong Hongqi Ruihong Building Material Co., Ltd.

 Changsha Guoyu Building Material Co., Ltd.

Shandong Xingmin Steel Ring Co., Ltd.

Wei'ao Industrial mainly produces various types of industrial dust removal equipment such as bag filter, cyclone dust collector, pulse dust remover and organic waste gas treatment equipment. At the same time, we provide dust removal system design, installation and construction, maintenance and other services for customers. Ensure that users successfully pass environmental protection acceptance. In order to protect the interests of users, at the same time as signing the contract, our company will sign technical agreements with users to ensure the effect of dust removal. Welcome all kinds of business calls, visits to discuss cooperation.

Crude Oil Refinery Machine manufactured by Yilong Machinery,we hasve strong technical team to support customer get right end production, we have strong installation team to help customer finish installation perfectly and high-effectively, we have 24 hours After-sale Service team to ensure customer running machine continuously, 

Attention: Please provide your expected capacity, raw material parameter so that we can provide right solution as early as we can.

Crude Oil Refinery Machine

Crude Oil Refinery Machine,Oil Refinery Machine,Crude Oil Refinery Equipment,Crude Oilrefining Machine

Shangqiu Yilong Machinery Equipment Co., Ltd. , http://www.sqzhongminggroup.com

Posted on