Pinpoint Hand Held Super Scanner Metal Detector

TX2002 small hand held body security inspection detector
 


 Application:
1. Electronic detection inspection at airports, railway stations and wharves.
2. Security inspection of customs, public securities.
3. Quality inspection of medicine and food commercial systems.
4. Security inspection of important sites and playgrounds.
5. Noble metal detection, such as gold or silver jewelry manufacturing plants.

Detection distance:
1.Pin               30-60mm
2.64 model handgun   150mm
3.6 inch long knife    160mm
4.Diameter           20mm
5.Steel Ball           90mm

Features:
1. Highly sensitivity.
2. Simple and convenient to use, no adjustment is required.
3. The detection distance will not be changed when the battery voltage drops from 9V to about 7V.
4. Low power consumption, can work for 40 hours continuously.
5. There is automatic and continues alarm when the battery is used up.
6. Switch on/off audio prompt function.
7. With external rechargeable socket hole.
8. Has audio, Light and vibration hand off switch.

Charger voltage: 9V for AC; 10V for DC.(The battery and charger shall be self-provided)

The holster is free TX2002 small hand held body security inspection detector
 


 Application:
1. Electronic detection inspection at airports, railway stations and wharves.
2. Security inspection of customs, public securities.
3. Quality inspection of medicine and food commercial systems.
4. Security inspection of important sites and playgrounds.
5. Noble metal detection, such as gold or silver jewelry manufacturing plants.

Detection distance:
1.Pin               30-60mm
2.64 model handgun   150mm
3.6 inch long knife    160mm
4.Diameter           20mm
5.Steel Ball           90mm

Features:
1. Highly sensitivity.
2. Simple and convenient to use, no adjustment is required.
3. The detection distance will not be changed when the battery voltage drops from 9V to about 7V.
4. Low power consumption, can work for 40 hours continuously.
5. There is automatic and continues alarm when the battery is used up.
6. Switch on/off audio prompt function.
7. With external rechargeable socket hole.
8. Has audio, Light and vibration hand off switch.

Charger voltage: 9V for AC; 10V for DC.(The battery and charger shall be self-provided)

The holster is free

CNC punching and shearing equipment for the processing of angles studied for small and medium size steel construction companies. These lines provide flexibility and simple use, and are characterized by an innovative infeed roller conveyor system allowing high precision with minimum loss of material.

Advantages:

• Versatile solution: each model can be configured according to the most diverse production lots and to customer requirement with an affordable investment.
• Compact frame for easy installation and reduced overall size.
• Remote diagnosis is possible through a network connection that allows our service team to perform routine checks

The linear tool carrier (y-axis) has several stations that hold the punching tools and one cutting tool. Especially for flexibility and efficient processing are setup times a crucial cost factor. Downtimes should be reduced to a minimum. Therefore, recent tool systems are designed for fast and convenient change of punches and dies. They are equipped with a special plug-in system for a quick and easy change of tools.

There is no need to screw anything together. The punch and die plate are adjusted to each other automatically Punches and dies can be changed rapidly meaning less machine downtime

Angle punching round hole and s-lot hole samples

The Punching Unit:

This unit is consists of three pieces of machine body, two hydraulic pressure punching cylinders, four die bases with upper and lower dies, and two sets of servo systems for controlling stadia adjustment. This unit can be installed three different standards punches on each side. Every punch matches with one gas cylinder. The gas cylinder piston pole links a padding block, which installed between punch poles and oil cylinder press head. It automatic chooses punch, namely choose relevant gas cylinder to drive relevant padding block according to the order of computer. The position of stadia is located by servo motor, which drives ball screw to drive die base move up and down, thus to achieve the requirement of stadia position. It can punch many rows and different diameters holes on two wings of angle steel.

The Marking Unit:

New design for type marking unit, more stable and longer life

This unit consists of fix lathe bed, movable lathe bed, hydraulic pressure head, four positions oil cylinders (can change four positions for character boxes) and adjusting device. According to the order of computer, to mark on places the drawings require. For making the mark clear and endurable, and avoiding the angle steel abrade character heads, it adds oil cylinder of movable lathe bed uplift and falling. For satisfying the processing scope, it adds manual adjustment setup, which can change the position of characters to adapt different standards angle steel.

The Shearing Unit:

 This unit consists of frame machine body, hydraulic pressure dynamic cylinder, upper blade setup, lower blade setup, and front bracket tank etc. The front bracket tank avoids angle steel to strike lower blade. The lower blade setup can adjust the clearance according to angle steel thickness to ensure the cutting quality. It cuts different standards of angle steel, according to the order of computer.

The Feeding Conveyors:

Double linear guide and detection rack for total feeding conveyor ensure better accuracy and machine stability. Linear guide from Taiwan HIWIN.

The NC Feeding Carriage:

Newest NC carriage, linear guide drive, accuracy and stability much better!

NC carriage linear guide cushion, pneumatic lift

Work Table And Overturning Rack:

Overturn rack for loading material automatically

Angle Punching Marking Shearing Line

Angle Punching Marking Shearing Line,Angle Connecting Plate Punching,Punching Shearing And Marking Line,CNC Angle Production Line

Shandong Sunrise CNC Machine Co., Ltd , http://www.scmcnc.com