High Accuracy Ultrasonic Level Sensor

Model No.: A+E-63LA
Warranty: 1 Year
Certification: CE
Material: ABS
Operating Temperature: -20℃ to 80℃
Product Type: Ultrasonic Water Level Meter
Dead Zone: 0.25–0.6m
Resolution: 1mm
Beam Angle: 4–6 Degrees
Operating Pressure: Less than 0.3 MPa
Display: Digital LCD
Output Signal: 4–20mA
Power Supply: DC 12–36V
Environmental Temperature: -20 to 60°C
Protection Rating: IP65
Brand: AEAD
Packaging: Carton
Origin: Shanghai, China
HS Code: 90261000
High Accuracy Ultrasonic Level Sensor

High Accuracy Ultrasonic Level Sensor


Key Features

1) Equipped with a two-line LCD and user-friendly keyboard for easy operation.
2) Integrated detection module with 4–20 mA or RS485 interface available.
3) All input and output cables are protected against overvoltage and overcurrent.
4) Built-in temperature sensor for accurate readings in varying conditions.
5) Automatically detects and suppresses electrical interference for stable performance.
6) Offers four different response speeds, ensuring accurate average level readings even with rapid liquid fluctuations.
7) Non-contact design ensures long-term reliability and durability.

Installation Guide
1) Ensure the distance between the probe and the lowest point of the liquid is within the meter's measuring range.
2) The distance from the probe to the highest liquid level should be greater than the dead zone of the device.
3) Keep the probe surface parallel to the liquid surface for optimal performance.
High Accuracy Ultrasonic Level Sensor
Applications
1) Ideal for continuous monitoring of liquids, pastes, and small particles without direct contact.
2) Supports system integration via 4–20 mA analog signal or RS485 interface with ModBUS protocol.
Measuring Range 0–3m, 0–6m, 0–10m, 0–15m, 0–20m
Dead Zone 0.25–0.6m
Accuracy ±0.3%FS
Resolution ±1mm
Beam Angle 4–6 degrees
Pressure Under 0.4 MPa
Display LCD
Analog Output 4–20mA
Digital Output HART (optional, additional charge)
Power Supply DC 12–36V
Ambient Temperature -20 to 60°C
Protection IP65
Housing Material ABS
Probe Material Waterproof, ABS, corrosion-resistant, PTFE

If you're interested in our ultrasonic water level transmitter, feel free to contact us at +86-(0)21-5869 6328. Alternatively, you can send us an email or use the contact form available on our website's contact page. We’re here to help with any inquiries you may have about this high-performance level sensor. Whether you're looking for technical support, product details, or pricing information, we’re ready to assist you. Don't miss the opportunity to enhance your measurement systems with reliable and accurate technology.

High Temperature Resistance Filament

High Temperature Resistance Filament

Tai Hing's High Temperature Resistance Filament include Nylon Filament PA6/66/46 and PeekFil. They all have better features of good bending recovery, high temperature resistance, softness, higher straightness and stable chemical properities. High temperature resistance series filament are suitable for manufacturing Hairbrush Filament, salon's hairbrush, Industrial Brush Filament, electronic cigarette cleaning brush, perm stick and other brushes with high temperature resistance.

High Temperature Filament,Nylon 66 Brush Filament,Nylon 46 Synthetic Bristles,Peek Brush Fiber

Tai Hing Nylon Filament Products Co.,Ltd , https://www.brushfibres.com

Posted on