â— Blasting equipment transporter Blasting equipment transport vehicle, also known as explosives transport vehicles, detonator transport vehicles, explosion-proof cars, civilian explosive car, fireworks and firecrackers. It is based on the relevant national ministries and commissions on the blasting equipment transport specifications and user requirements and development and production, product line with the National Defense Technology and Industry Commission, "Blasting Equipment Transporter Safety Technical Conditions" requirements.
Rated load capacity can be 0.5 tons - 9.9 tons (National Commission of Science, Technology, Industry and Technology requires the maximum tonnage of households does not exceed 10 tons).
Blasting equipment transporter has been separated from the original flat transport, and changed to van transport. The car body is a double-layer metal skeleton structure, the outside is a cold-rolled steel plate, the inner wall is covered with an aluminum alloy plate, and the interlayer is filled with a heat-insulating flame-retardant material. If you need to install the anti-riot container, open the side door. The side wall is equipped with a natural ventilation window with rain protection function to make the air flow inside and outside the box. The interior of the box is anti-static treatment. The bottom of the box and the front of the box are paved. The flame-retardant antistatic rubber sheet is connected with the equipotential of the chassis, and is connected to the ground through the static conductive device at the rear of the vehicle to prevent the generation of static sparks and the timely release of static electricity from the vehicle, thereby improving the safety of the vehicle. The front and side of the car body are equipped with fixed pull rings, and tied goods are used with the binding band to avoid movement and ensure safety.
â— Blasting equipment transporter structure
1, the chassis chassis model can be divided into: Dongfeng series, Jiangling series, JAC series, Beiqi Aoling series, Beiqi era series, Beiqi Auman series, Qingling series, Liberation series, etc. The chassis can be divided into: Drives and four-drives can have a rated load of 0.5 tons to 9.9 tons (National Commission of Science, Technology and Industry requires the maximum tonnage of households not to exceed 10 tons)
2. The car body can be divided into two parts: 1: transport explosives; 2: transport detonators (anti-explosion containers); 3: explosives, detonators transport at the same time (car bodies must be compartmentalized, sub-warehouse transport, anti-explosive containers installed) ).
The car body is a double-layer metal skeleton structure, the outside is a cold-rolled steel plate, the inner wall is covered with an aluminum alloy plate, and the interlayer is filled with a heat-insulating flame-retardant material. If you need to install the anti-riot container, open the side door. The side wall is equipped with a natural ventilation window with rain protection function to make the air flow inside and outside the box. The interior of the box is anti-static treatment. The bottom of the box and the front of the box are paved. The flame-retardant antistatic rubber sheet is connected with the equipotential of the chassis, and is connected to the ground through the static conductive device at the rear of the vehicle to prevent the generation of static sparks and the timely release of static electricity from the vehicle, thereby improving the safety of the vehicle. The front and side of the car body are equipped with fixed pull rings, and tied goods are used with the binding band to avoid movement and ensure safety.
3. The smoke detector is a special device for sensing the fire inside the compartment. It is installed in the top of the compartment and connected with the alarm device in the cab. When there is a smoke in the fire, a buzzing alarm in the cab informs the driver to ensure that Eliminating dangers in time.
4. Anti-theft alarm In order to ensure safety, doors are opened at the rear and sides of the compartment. Door magnetic switch alarms are installed at the top of each door frame (optional anti-theft monitor according to user requirements. Drive recorder, etc.) When the door is When turned on, the buzzer in the cab sounds an alarm. When not in use, the control switch in the cab can be turned off. This ensures that the vehicle is always in a controlled state during driving.
5. The exhaust system of the vehicle's engine adopts a front-mounted type and an exhaust spark extinguisher (fire shield) is installed to prevent the heat source from adversely affecting the explosives.
6, the chassis is equipped with two electrostatic conductive tape mop, the outside of the car body installation marker marker lights and portable fire extinguishers and other safety devices.
7. The body color is yellow, and there are “No fireworks†and “Blast†words with reflective logos.
â— Features Blasting equipment transporter has the main functions of high strength, fire-retardant, fire-retardant, anti-rain, anti-static spark, fire alarm and anti-theft alarm.
1. The installation of a smoke alarm is a special device for sensing the fire in the compartment. It is installed in the top of the compartment and is connected with the alarm device in the cab. When there is a smoke in the fire, a buzzing alarm in the cab informs the driver. , to ensure timely elimination of dangerous situations.
2. The chassis is equipped with two static conductive tapes for dragging ground, and the safety devices such as the marker lights on the outside of the body and portable fire extinguishers are installed.
3, the body color is yellow, and there are "no fireworks" and "explosion" words, affixed with reflective logo.
4, installed anti-theft alarm, in order to ensure safety, open the door in the rear and side of the car, installed in the door frame above the magnetic switch alarm (optional anti-theft monitor according to user requirements. Drive recorder, etc.) When the door is opened, the buzzer sounds an alarm in the cab and can turn off the control switch in the cab when not in use. This ensures that the vehicle is always in a controlled state during driving.
5. The exhaust system of the vehicle's engine adopts a front-mounted type and an exhaust spark extinguisher (fire shield) is installed to prevent the heat source from adversely affecting the explosives.
Xia Gong Chu Sheng (Hubei) Special Vehicle Manufacturing Co., Ltd. Sales Manager Deng
Amine Series ,Tertiary Amine ,Secondary Amine ,Amino Group
Industrial Chiller Co., Ltd. , http://www.nbrefrigerantgas.com