DMF/DMAC/Ammonia recycle application


DMF/DMAC/Ammonia recycle application
Working principle: The use of solvents (such as water) for the strong absorption of harmful or valuable components (such as DMF or DMAC) in the exhaust gas, to purify the exhaust gas to meet the emission standards, or to recover valuable components, and recycle them after purification by distillation. , or both purification and recycling purposes.
Installed in the ammonia water circulation system line renderings
The ATAGO concentration meter CM-800a is installed on the first circulation loop. The absorption solvent (such as water) in this section comes from the second loop. The solvent has already absorbed the target components in the exhaust gas in the second loop and passed through. When the first cycle loop is further absorbed, the solvent absorption capacity will be reduced. The ATAGO Concentration Meter CM-800a can immediately monitor the target components in the solvent, judge the solvent's absorption ability to the target components, and determine whether to increase the fresh absorption solvent to increase the absorption. effectiveness.
Because the density of the solution and the density of water are basically the same, it is not feasible to measure the density and mass flowmeter in this case. The ATAGO concentration meter CM-800a can effectively and stably measure the concentration of the solution, passing 4-20mA. Analog signals are transmitted remotely to the control room.

In order to be able to simultaneously measure various types of aqueous solution concentrations (dilution) with Brix values, the ATAGO Refractometer can directly display the concentration value on the screen. There are more than 80 special scales to choose from.

Vacuum washing & suction truck is a new type dual use vehicle, which combined the water washing truck and vacuum suction truck. when the sewer blocked, use high pressure washed and Dredge sewer then the waste water suction by Vacuum Tanker(Vacuum Tank Truck).

Except the use of collection, transfer, cleaning and transportation of sludge, sewage, it can also fuction as washing truck.  Vacuum sewage suction tank can be self-priming and self-draining, The water tank is equipped with nozzles, so that the truck can be used to clean up the street. The high working efficiency, large capacity, convenient transportation,multifunction make  Vacuum sewage & pressure washing truck suitable for collection and transportation of sewage , mud, oil and other liquid substance, as well as cleaning and washing. Vacuum sewage tank adopts domestic technology leading vacuum pump that has large suction power, wide suction range, especially applicable for sewer sediment suction, loading and unloading. The most extinguishing advantage is that it can suck sewer mud, mud, stones, bricks and other large objects.

Vacuum Washing & Suction Truck

Sewage Suction Truck,Vacuum Washing Truck,High Pressure Cleaning Truck,High Pressure Flushing Truck,Vacuum Tanker,Vacuum Tank Truck

Suizhou lishen special vehicle co.,ltd , http://www.ls-truck.com

Posted on