Scrap Cable Wire Recycling Machine

 

Wire Recycling Introduction: 
JLF series copper wire recycling machine is used for recycling waste household communication cables, car cables,motor cables and other industrial cables. The machine mainly includes crushing and separating,and it also has high efficiency dust collecting system to get clearly copper pellet and plastic pellet. 

Wire Recycling Features:
JLF-600(capacity:300-400kg/h)has high recycling efficiency and high purity. Mixed crushed material(copper pellet and plastic pellet)enter vibrating separator together with airflow,and finally the pellet are put on the small vibrator(second separating system)to get 100% purity.



Wire Recycling Applications: 
Applicable cables: Waste communication copper cables, motor cable, car cable, industrial cable,household cable, enamelled cable.
Applicable cable diameter: 0.3-20mm
PS: the diameter is for each single strand. 
If you are not sure whether your cables are applicable for our equipment, you could send some cables to us for testing.
TESTING IS FOR FREE! 

Wire Recycling Advantages:
1. Integrated structure, small dimensions, easy to move, saving space.
2. Low power consumption, stable performance. 
3. Minimum copper recycling rate can reach 99%.
4. No water is needed, no dust, no environmental pollution.
5. Controlled by electricity control panel, highly automatic.

Wire Recycling Specifications: 
Wire Recycling Detail Instruction: 
1.Shredding System: Shredding is the first step of whole recycling process of the granulator machine.There is 14pieces of moving blades inside the crusher, and it can cut small pieces of scrap copper wires to small pellet with size of 5-8mm(depends on raw material size).
2.Separating system: The high pressure fan brings crushed copper and plastic pellet into the vibrating separator. There is screen inside the system,which can take copper pellet and plastic pellet to different outlet).
3.Dust Collector: There is combined dust collecting system on the recycling machine.
4.Copper pellet outlet:Crushed and separated copper pellet get out of this exit.
5.Plastic pellet outlet: Crushed andseparated plastic pellet get out of this exit.
6.Electric control box: Normally we match automatic controlling system with the machine.And we could also accept control system customization. 
 





Wire Recycling Spare Parts&Related Machine: 
Main spare parts of copper wire recycling machine is screen and moving blades.Normally we supply extra one set sapre parts includes 1 piece of screen and 14 pieces of blades for JLF-600 granulator machine. 
We also recommend proper related machines to customer according to the raw material to get best recycling effect. 
Pre-treat Machines: 
1. Cable stripper: if customer deal with large size copper wires with multi-strand,it is better to separate its cores and then put them into granulator machine. 
2. Double shaft crusher: If the raw material is with large lenth, it will be helpful to cut them to smaller pieces before granulating. 
3. Blade sharping machine: After long time operating, blades on the granulator machine need maintiance to get good sharpness. 
4. Megnatic conveyor: If there is a small part iron mixing inside the copper wire, we can add a magnatic conveyors to take out of the iron mixing of the copper pellet to get high purity. 
5. Belt conveyor: It is supplied to customer who required totally automatic copper wire feeding. 




Wire Recycling Customer Visiting&Exhibitions: 
  We have standard hot sale models machine in stock in factory for customer inspecting and testing. 
  We attend domestic and international exhibitions every year. 
   
 Wire Recycling Packing&Shipping:
For JLF-600 granulator machine, normally we pack it with plastic films and put them into container. 
If customer requires, we could pack parts of it with ply wooden case. 
Normally One set JLF-600 requires ONE piece of 20' container for shipping. 




Wire Recycling FAQ   The spare part of the machine is blades and screen, their use life is more than 2 years, and we could also supply blade sharping machine to you for maintenance.
    Normally 10 hours per day. 
    We design precise but simple control system for the machine. 
   For single recycling machine, only one worker is required. 
   For complete recycling line, two workers are required. 

 Wire Recycling Factory Introduction:
 Liyang Tongfu Machinery Co.,Ltd is professional manufacturer who specialized on recycling and new energy(environmental filed). 
We proposes that"remarkable quality practical innovation" Welcome customers contact us for ture business relationships and achieving mutual success also establishes the long-term friendly cooperation.



Contact information:

Attn: Tina 
Mobile):+8615981925357 
   

Wire Recycling Introduction: 
JLF series copper wire recycling machine is used for recycling waste household communication cables, car cables,motor cables and other industrial cables. The machine mainly includes crushing and separating,and it also has high efficiency dust collecting system to get clearly copper pellet and plastic pellet. 

Wire Recycling Features:
JLF-600(capacity:300-400kg/h)has high recycling efficiency and high purity. Mixed crushed material(copper pellet and plastic pellet)enter vibrating separator together with airflow,and finally the pellet are put on the small vibrator(second separating system)to get 100% purity.



Wire Recycling Applications: 
Applicable cables: Waste communication copper cables, motor cable, car cable, industrial cable,household cable, enamelled cable.
Applicable cable diameter: 0.3-20mm
PS: the diameter is for each single strand. 
If you are not sure whether your cables are applicable for our equipment, you could send some cables to us for testing.
TESTING IS FOR FREE! 

Wire Recycling Advantages:
1. Integrated structure, small dimensions, easy to move, saving space.
2. Low power consumption, stable performance. 
3. Minimum copper recycling rate can reach 99%.
4. No water is needed, no dust, no environmental pollution.
5. Controlled by electricity control panel, highly automatic.

Wire Recycling Specifications: 
Wire Recycling Detail Instruction: 
1.Shredding System: Shredding is the first step of whole recycling process of the granulator machine.There is 14pieces of moving blades inside the crusher, and it can cut small pieces of scrap copper wires to small pellet with size of 5-8mm(depends on raw material size).
2.Separating system: The high pressure fan brings crushed copper and plastic pellet into the vibrating separator. There is screen inside the system,which can take copper pellet and plastic pellet to different outlet).
3.Dust Collector: There is combined dust collecting system on the recycling machine.
4.Copper pellet outlet:Crushed and separated copper pellet get out of this exit.
5.Plastic pellet outlet: Crushed andseparated plastic pellet get out of this exit.
6.Electric control box: Normally we match automatic controlling system with the machine.And we could also accept control system customization. 
 





Wire Recycling Spare Parts&Related Machine: 
Main spare parts of copper wire recycling machine is screen and moving blades.Normally we supply extra one set sapre parts includes 1 piece of screen and 14 pieces of blades for JLF-600 granulator machine. 
We also recommend proper related machines to customer according to the raw material to get best recycling effect. 
Pre-treat Machines: 
1. Cable stripper: if customer deal with large size copper wires with multi-strand,it is better to separate its cores and then put them into granulator machine. 
2. Double shaft crusher: If the raw material is with large lenth, it will be helpful to cut them to smaller pieces before granulating. 
3. Blade sharping machine: After long time operating, blades on the granulator machine need maintiance to get good sharpness. 
4. Megnatic conveyor: If there is a small part iron mixing inside the copper wire, we can add a magnatic conveyors to take out of the iron mixing of the copper pellet to get high purity. 
5. Belt conveyor: It is supplied to customer who required totally automatic copper wire feeding. 




Wire Recycling Customer Visiting&Exhibitions: 
  We have standard hot sale models machine in stock in factory for customer inspecting and testing. 
  We attend domestic and international exhibitions every year. 
   
 Wire Recycling Packing&Shipping:
For JLF-600 granulator machine, normally we pack it with plastic films and put them into container. 
If customer requires, we could pack parts of it with ply wooden case. 
Normally One set JLF-600 requires ONE piece of 20' container for shipping. 




Wire Recycling FAQ   The spare part of the machine is blades and screen, their use life is more than 2 years, and we could also supply blade sharping machine to you for maintenance.
    Normally 10 hours per day. 
    We design precise but simple control system for the machine. 
   For single recycling machine, only one worker is required. 
   For complete recycling line, two workers are required. 

 Wire Recycling Factory Introduction:
 Liyang Tongfu Machinery Co.,Ltd is professional manufacturer who specialized on recycling and new energy(environmental filed). 
We proposes that"remarkable quality practical innovation" Welcome customers contact us for ture business relationships and achieving mutual success also establishes the long-term friendly cooperation.



Contact information:

Attn: Tina 
Mobile):+8615981925357 
 

air conditioner system

Air Conditioner System

air conditioner system

Guangzhou Ruicheng Enterprise Services Co., Ltd. , https://www.rayparts.cn