Model NO.: MXBL10
Color Temp : 6000K
Working Temperature: -45 ~85°c
Trademark: Maxtree
Transport Package: Carton
Specification: 9-110v
Origin: China
HS Code: 85122010
Model NO.: MXBL10
Color Temp : 6000K
Working Temperature: -45 ~85°c
Trademark: Maxtree
Transport Package: Carton
Specification: 9-110v
Origin: China
HS Code: 85122010
                10W BlueSpot point Safety Light For KION TruckProduct Specification:
| Place of origin | China(Changzhou) |
| Brand | Maxtree |
| Name | Safety Led Light |
| Led Source | CREE LED |
| High Power | 10W(2x5W Cree LEDs) |
| Operate Voltage | 10-80V DC |
| Luminous Flux | 1000Lm |
| Style | Waterproof, Dustproof, Shockproof |
| Body | Aluminum housing with PC Lens |
| Usage | Forklift |
| Working Temperature | -45 ~85°C |
| Service Life | ≥30000Hours |
| Color Temp | 6000K |
| Waterproof                    | IP68  |
| Material  | Plastic housing,PC lens,stainless steel bracket |
| Color | Blue or red for option |
| Beam | Spot beam |
| Warranty | 24months |
Advantages For Led spot point forklift light:
- Wide operating voltage range: It can apply to different types of trucks, cars, and other vehicles
- High intensity CREE LED chips;
- Lamp body is faster radiating than aluminum,high temperature resistance,beautiful exterior;
- Lamp cover adopted imported pmma technology,good vitreousness,anti high/low temperature burs;
- Lamp reflector used optical reflectivity projector lens,long reflect distance;
- Fix device from Japanese airlines tighten technology,stainless steel,shakeproof,rustproof,water proof;
- Energy saving,high brightness,long lifespan,adopted japanese encapsulation technology;
- Universal for 9V-32V power sources;
- Life Span: more than ordinary led bulbs, more than 30000 hours;
- Excellent water-proof and shock-resistant aluminum housing;
- Dazzle soft light;
- Work in rain and difficult operation conditions;
- Easy to wire up, install and adjust.
      Â
 
             Â
Installation:
• Suggested wiring is to ground the black wire and connect the red wire to the strobe light's positive wire.  The current draw is minimal enough that the wire should be able to handle it just fine.  You can also connect the forklift bluespot to the reverse alarms positive wire if you would like it to only be on while in reverse or if you lack a strobe light.  Ideally though, you would want it on constantly for pedestrial safety.
• Typically, the forklift bluespot is mounted to the overhead guard near the strobe or rear work light.
• It is recommended to focus the spot about 7-8 feet from the rear of the forklift.   Â
Maxtree Service:
Forklift Safety Light OEM and ODM is available. We can make the lights as your requirements , like print your logo on the lights. As long as your orders is big enough.   Â
Maxtree After-sales Serivice:• Suggested wiring is to ground the black wire and connect the red wire to the strobe light's positive wire.  The current draw is minimal enough that the wire should be able to handle it just fine.  You can also connect the forklift bluespot to the reverse alarms positive wire if you would like it to only be on while in reverse or if you lack a strobe light.  Ideally though, you would want it on constantly for pedestrial safety.
• Typically, the forklift bluespot is mounted to the overhead guard near the strobe or rear work light.
• It is recommended to focus the spot about 7-8 feet from the rear of the forklift.   Â
Maxtree Service:
Forklift Safety Light OEM and ODM is available. We can make the lights as your requirements , like print your logo on the lights. As long as your orders is big enough.   Â
Our warranty is Lifetime. If you find the lights have some quality trouble when you got the packages , such as the bulbs can NOT work , please take some photos and email us. Afer our confirming, we will send the replacement to you.                 10W BlueSpot point Safety Light For KION Truck
Product Specification:
| Place of origin | China(Changzhou) |
| Brand | Maxtree |
| Name | Safety Led Light |
| Led Source | CREE LED |
| High Power | 10W(2x5W Cree LEDs) |
| Operate Voltage | 10-80V DC |
| Luminous Flux | 1000Lm |
| Style | Waterproof, Dustproof, Shockproof |
| Body | Aluminum housing with PC Lens |
| Usage | Forklift |
| Working Temperature | -45 ~85°C |
| Service Life | ≥30000Hours |
| Color Temp | 6000K |
| Waterproof                    | IP68  |
| Material  | Plastic housing,PC lens,stainless steel bracket |
| Color | Blue or red for option |
| Beam | Spot beam |
| Warranty | 24months |
Advantages For Led spot point forklift light:
- Wide operating voltage range: It can apply to different types of trucks, cars, and other vehicles
- High intensity CREE LED chips;
- Lamp body is faster radiating than aluminum,high temperature resistance,beautiful exterior;
- Lamp cover adopted imported pmma technology,good vitreousness,anti high/low temperature burs;
- Lamp reflector used optical reflectivity projector lens,long reflect distance;
- Fix device from Japanese airlines tighten technology,stainless steel,shakeproof,rustproof,water proof;
- Energy saving,high brightness,long lifespan,adopted japanese encapsulation technology;
- Universal for 9V-32V power sources;
- Life Span: more than ordinary led bulbs, more than 30000 hours;
- Excellent water-proof and shock-resistant aluminum housing;
- Dazzle soft light;
- Work in rain and difficult operation conditions;
- Easy to wire up, install and adjust.
      Â
              Â
Installation:
• Suggested wiring is to ground the black wire and connect the red wire to the strobe light's positive wire.  The current draw is minimal enough that the wire should be able to handle it just fine.  You can also connect the forklift bluespot to the reverse alarms positive wire if you would like it to only be on while in reverse or if you lack a strobe light.  Ideally though, you would want it on constantly for pedestrial safety.
• Typically, the forklift bluespot is mounted to the overhead guard near the strobe or rear work light.
• It is recommended to focus the spot about 7-8 feet from the rear of the forklift.   Â
Maxtree Service:
Forklift Safety Light OEM and ODM is available. We can make the lights as your requirements , like print your logo on the lights. As long as your orders is big enough.   Â
Maxtree After-sales Serivice:• Suggested wiring is to ground the black wire and connect the red wire to the strobe light's positive wire.  The current draw is minimal enough that the wire should be able to handle it just fine.  You can also connect the forklift bluespot to the reverse alarms positive wire if you would like it to only be on while in reverse or if you lack a strobe light.  Ideally though, you would want it on constantly for pedestrial safety.
• Typically, the forklift bluespot is mounted to the overhead guard near the strobe or rear work light.
• It is recommended to focus the spot about 7-8 feet from the rear of the forklift.   Â
Maxtree Service:
Forklift Safety Light OEM and ODM is available. We can make the lights as your requirements , like print your logo on the lights. As long as your orders is big enough.   Â
Our warranty is Lifetime. If you find the lights have some quality trouble when you got the packages , such as the bulbs can NOT work , please take some photos and email us. Afer our confirming, we will send the replacement to you.
Level Switch Enclosure,Aluminum Enclosure Housing,Injection Parts
Krong International Trade Limited , http://www.shdiecasting.com