In the domestic market two years ago, LED lights are still more in the topic, and at present, many models with LED lights have been mass-produced. Brands including Volkswagen, General Motors, BMW, Mercedes-Benz and Ford have launched new models of LED front and rear lighting fixtures with brand recognition effects, which have successfully attracted many consumers. Before 2010, the average growth rate of the domestic LED automotive lighting market was 13, and in recent years, the LED lamp market has grown at a rate of more than 40. Last year, the domestic automotive lighting market exceeded 20 billion yuan. It is predicted that there will be 245,000 sets of LED car headlights in the domestic market this year, and this number will reach 907,500 sets in 2016, which will more than triple the growth, while the taillight application with LED function will be more For a wide range. According to the Ministry of Industry and Information Technology, as of the end of 2015, automotive lighting needs to meet the carbon dioxide emission reduction targets. As a recognized representative of low-carbon and environmental protection, LED will naturally be included in the scope of automotive lighting upgrade and transformation, becoming the darling of automotive lighting, thus forming a market demand of tens of billions or even hundreds of billions, LED automotive lighting market prospects Can be expected. Because LED lights have a cold light source, they have the advantages of low power consumption and long life. The power consumption is only 1/10 of that of traditional lamps, which can save fuel consumption. If the daily energy-saving lamps are used, the energy-saving lamps can save 4/5 more energy than the incandescent lamps, and the LEDs can save 1/4 more energy-saving lamps. In the car, the same daytime running lights, the energy consumption of the LED components is only The halogen lamp is 1/20 and has a service life of 5 to 10 years. In addition, LED components have the advantages of small size, compact and easy layout and design, leaving car manufacturers with a shape in the car design. The vast space breaks the shackles of the past lighting system to shape innovation, and meets the needs of the appearance of the car, which also brings business opportunities to the domestic LED lamp industry. In February 2011, the EU required all new models of cars and minivans to be equipped with daytime running lights. In addition to the EU, other countries have begun to regulate the new cars of all types of vehicles to install daytime running lights. Relevant policies of various countries have been introduced to accelerate the popularization of LED lights. Industry experts say that daytime running lights must maintain brightness while the vehicle is in motion. Because LED light source has the advantages of low energy consumption and long life, considering the trend of driving safety and energy saving demand, it is an inevitable trend for manufacturers to develop LED daytime running lights. It can be said that the LED light source is an ideal light source, but the LED replacement is still in need of a transition period. At present, LED headlights are mainly concentrated in a few high-end models, such as Audi R8 and A8, Mercedes-Benz CLS, BMW X6M and the new BMW 7 Series. China's auto industry has few independent brands, most of which are medium and low-end cars. There are not many LED lights. At present, only high-position brake lights and side turn signals use LED light sources. In addition, because of the problem of illumination distance and brightness, LEDs are rarely used for heads. Lighting. Due to the high cost, technical and regulatory factors, LEDs are still immature as automotive headlamps, and at least for the next three to five years, halogen and xenon lamps cannot be fully replaced. However, I believe that with the continuous decline of LED costs and the simultaneous improvement of technology, the automotive industry will be more widely used, LED lights will become more secure and intelligent, and there will be more and more advantageous technologies. Leading the development of automotive lighting.
Nonwoven Also Call Filter Pocket, Nonwoven is processed to multi-layer with advanced automatic welder, and there are three layers: One is coarse fiber to collect the big particles; The second is to collect small particles. The outside layer is reinforcing the effect. The advance structure design increase nonwoven performance and avoid any leakage under wind pressure on filter bag, inside screen can avoid the pockets join together and refine the leeward area, decrease the resistance, increase the dust holding capacity. The enhanced pocket is three-dimensional helical structure which can decrease the resistance by 30%. The performance is stability, the nonwoven media is washable. Dust collecting is 2.5times of the media, the temperature is< 85 the width is 0.6-0.75, the length is upon customer's requirement.
Application:
Nonwoven is mainly used in HVAC system and air conditioning system, precision instrument factory, Electronics Factory, make-up room and painting room etc.
Technical parameter:
Special size and thickness are available upon request.
Model: FY-45 FY-65 FY- 85 FY-90 FY-95
Velocity: 0.4 0.3 0.15 0.1 0.1
Color: orange , green pink yellow white
Nonwoven Filter Bag
Nonwoven Filter Bag,Non Woven Filter Bag,Nonwoven Also Call Filter Pocket,Nonwoven Filter Media
Hebei Fangyu Trade Co., Ltd. , http://www.filtersmaterial.com