Model NO.: TYA-50
Trademark: Zhongneng
Origin: Chongqing, China
HS Code: 8421299090
Model NO.: TYA-50
Trademark: Zhongneng
Origin: Chongqing, China
HS Code: 8421299090
                            Zhongneng Lubricating Oil Purifier TYA SeriesÂ
                                          (HOT SALE)
Application and Features
Application
The TYA series can fast degas, dewater, and remove the impurity and the volatile matter (for example ethyl alcohol, gasoline, ammonia and so on). Enhances the oil quality, restores the lubricating oil viscosity, augments the flash point and improves the operational performance. Guaranteed the hydraulic system and the dynamic system, the lubrication system normal operation, so the machine is suit for many lines, such as the mine, metallurgy, electric power, transportation, manufactures and so on. Regenerating the used hydraulic oil, lubricating oil, coolant oil, machine oil and so on.
Features
With the strong ability to filter the impurity, which can filter the particles completeTYA.
It has the back flush system, which can clear impurities automaticalTYA.
Advanced dielectric condensation device
This machine installs the new pressure protector, which can control the temperature automaticalTYA; also it can drain water on line by the water-separator device. So it is easy to control this machine.
We adopt the high quality filter materials, which has a good function in anti-corrosive, thermostable, mechanical strength. EspecialTYA, the precision of eliminates impurity is high and the service life is long. Also, it has a large volume for storing the impurities.
The unique degas and dewater system: Using the Stereo-Evaporation technical, which can separate the water and gas from the oil quickTYA by the Multi-level water-oil separation technology.
Working Principle and Structure
1. Working Principle
When it starts working, the used oil will be poured into the heater to heat under the vacuum pressure, then the heated oil enter into the primary filter which will eliminate the big impurities, then the oil enter into the vacuum separator, the oil will flow the special radiation device, which make the unit/volume oil to produce a large surface area, lets the pollution oil exposure in the low humidity atmosphere, thus the water, air and gas can be eliminated. The treated vapor and gas form the gaseous mixture becomes the liquid through the water tank and the chiller condensation, then the liquid enters water receiver together, the vacuum extracts the surplus gas.
The oil which is drained away water flow into precision strainer where can exhaust particulates (oil purification). According the quantity of the water content, a whole purification needs many times circulation to drain away the water. Â
 Â
2. Flow Chart
Technology Indexes (Table 1,Table 2)
         Table 1 Vacuum Oil Purifier Technology Standard
| Parameters | Unit | TYA-50 | TYA-100 | TYA-150 | TYA-200 | TYA-300 |
| Flow rate | L/min | 50 | 100 | 150 | 200 | 300 |
| Vacuum degree | Mpa | -0.06 ~- 0.095 | ||||
| Working pressure | Mpa | ≤0.4 | ||||
| Temperature degree | ºC | 0~100 | ||||
| Working noise | dB(A) | ≤78 | ≤78 | ≤78 | ≤80 | ≤82 |
| Electric heating power | KW | 72 | 80 | 90 | 120 | 135 |
| Total electric power | KW | 75 | 87 | 101 | 135 | 147 |
| Inlet (outlet) caliber | mm | Ф32 | Ф42 | Ф50 | Ф50 | Ф60 |
| Size | mm | 1600x1150x1700 | 1750x1150x1750 | 1900x1600x1950 | 1950x1600x1950 | 2100x1600x2000 |
| Weight | Kg | 450 | 550 | 650 | 700 | 750 |
| Viscosity index | mm2/S | GB443-89 | ||||
| Flash point(open cup) | ºC | GB443-89 | ||||
| Moisture | % | No (GB/T260) | ||||
| Mechanism impurities | % | 0.05~0.005(GB/T511) | ||||
Table2 TYA Oil Purifier Treated Guarantee Value
| Item | Guarantee indexes |
| Moisture | ≤80PPM |
| Demulsification value | New oil≤15min,running oil≤30min |
| Clean degree | ≤6 Grade(NAS1638) |
Preparation And Check
1 All spare parts of the oil purifier have adjusted before leaving factory. When the product is sent to work point, they must be checked again.
2 Oil purifier is set up stabTYA. The oil inlet is connected with the oil outlet under part of the oil tank. The oil outlet is connected the top of the oil tank.
3 Carry out electrical wiring including grounding of the machine. Check all the wire connections of the power panel, oil pump, vacuum pump and heater to ensure reliable connection and insulation.
4 Conduct a test run of the oil pump-motor to see whether it runs clockwise (viewed from the end of the motor). If not, correct the power line wiring.
5 When dealing with the hydraulic oil and other mechanic oil on-line, pls suppTYA the same brand oil properly to make sure the oil level of the oil tank normally.
Operating Procedures of Control Panel Â
For external wiring of the control panel, please refer to the Electrical Diagram. Connect the mains of 318V 3-phase 4-wire AC to the left of the panel and make sure that the panel outer casing is reliably grounded.
Turn on the main switch and the power indicator is lit up, which shows the power is on.
When heating, turn on the temperature controller, and the red light dedicates that being preparation situation. Then turn on the switch of temperature controller set the working temperature to start the heater for oil heating. When the oil temperature reaches the set value, the temperature controller will automatically turn off the heater. Therefore, automatic heating can be conducted with thermostatic effect.
After stopping operation, turn off the main switch and lock the door of the control panel.
Operating Instructions
1.Operating procedures
a) Connect the main power to the machine and link the oil inlet and outlet pipes. According to the flow chart, separateTYA close all valves (1.9.10.13.16.17), which are connected to the outside, open valves2 and 4Â (or 3Â and 5, separateTYA use two primary strainers or the two ones can be used at the same time), 6, 9Â to form an oil-filtering road.
b) Turn on the vacuum pump. When the vacuum degree reach -0.07Mpa, slowTYA turn on oil inlet valve 1in order to make the oil flow into machine.
c) Observe the oil level of the vacuum separator. When the oil level reach the floating ball controls point, open the oil ball valve12, 19.
d) Open oil pump (note: after make sure the oil outlet valve is open, the oil pump can be opened, or there may be danger in bursting of tube.), the oil is exhausted from oil outlet so the oil purifier can filter oil circulatory. Adjust oil inlet valve 1Â to make the oil output reach balance basicalTYA, which means there is level controller to automaticalTYA control.
e) When the oil have circulated normalTYA to filter in the oil purifier (the inlet oil quantity is equal with the outlet oil quantity), open heater. Set the temperature between 45-70ºC(according to the requirement), then have the oil heated in constant temperature to guarantee the vacuum separator can degas and dehydrate.  Â
f) When the oil purifier work normalTYA, open the fan on the cooler in order to have the strong wind cool the system and start work. Make sure the water vapor and gas cooling to deposit in the water receiver of the cooler.
g) After the machine has run for a long time, sampling some oil at the sampling valve to test.
h) If the water content is large and form emulsification state (emulsification oil), open the valve7 and close valve6 make the water diversion device to demulsificate and dehydrate.
i) If the oil is needed to treat deepTYA, add some chemical properTYA to have the treated oil cleaner.
  Method: add some chemical (100g) into feed hopper, and then gradualTYA open up the feed hopper valve21 to absorb the chemical into vacuum separator through vacuum automaticalTYA. After stir automaticalTYA, have the chemical into fine filter to form a compact membrane so that it can filter fine.
2.Stop Machine
When finish treating oil or need stop suddenTYA, pls as following operate:
First restore the temperature controller, stop heating, after the machine run 3-5 minutes, close the oil inlet valve 1.
Close vacuum pump, stop exhaust vacuum.
Drain away the oil in the vacuum separator through oil pump, then close oil pump.
Open the vent valve on the vacuum separator, release vacuum, respectiveTYA open water receiver valve 10,17 to let out the rest oil or water. Open the precision filter valve 13 to drain away the remind impurities. Note: after finish the operation, remember to close valves so that can be used next time.
SpecialTYA note: if face the emergence situation, press the emergence-stopping button ,then the machine is divided with power. If want to restart the machine, must run clockwise to have the emergence-stopping button restore. So that can open the various control buttons to have the machine work normalTYA.
3.Use Instruction Â
The temperature range in working is between -20~45ºC.
The altitude of the work point can affect the vacuum degree of the machine. The altitude is higher, the vacuum degree is lower.
The used oil should not be too dirty (there are many impurities), or else must use other filter device to filter firstTYA (for example: JI series portability purifier) in order to avoid the effect of dehydrates, degas or jam the filter parts.
4.Notices in operation
When vacuum pump is working, pls note the oil situation of the oil level (the oil is above the oil level). if there are much water in vacuum pump oil or the oil is too dirty, replace instantTYA to avoid influencing the lifetime of vacuum pump.
If there are much water in the cooler when running, pls drain away instantTYA. First close valve15, open valve116,17 so that the water can be drained away from valve.
Pls observe the pressure gauge. When filtering oil, if the pressure>0.3Mpa, clean purifier instantTYA or replace the filter parts.
The filter net of the primary filter should be often clean in order to avoid jamming which cause lack of inlet oil or high pressure. When the capacity of the inlet oil is fewer, it means that the impurities in the filter net are much. Pls clean the net instantTYA.
Note whether the noise of the pump and related electric motor is normal when on-line. If there is abnormal situation, pls resolve the problem right now to avoid burning electric motor and influencing the lifetime of the oil pump.  Â
n)Â Â If the machine should not be used, pls drain away the oil in vacuum pump and inject new oil.
Maintenance
1.After a certain period of running, the machine should be checked to see whether:
Â
a) The electrical control system is safe and reliable;
b) The temperature controller is sensitive, reliable and accurate;
c) Oil seals of the pump shaft are broken with leakage;
d) There is any blockage with the running system and any abnormal noise with pumps or related motors;
e) There is any air or oil leakage with the oil running system and at sealing joints.
Â
2.After each 3000 hours' running, grease shall be replenished to prevent motors from being burnt.
Â
3.Special vacuum pump oil or lubricating oil N46 should be used fro the vacuum pump and oil replaced or replenished if necessary at any time.
Â
4.If the machine will not be used over 1 month, Place the machine in a dry environment with the panel door and all valves closed, and the machine proper protected by a covering.
Trouble Shooting
| Trouble | Cause | Remedy |
| The quantity of inlet oil is less that of outlet oil when the machine runs stably | The primary filter is jammed,the resistance of the secondary filter is increased | Unpick and wash the filter,rearrange the process of the secondary purification. |
| Abnormal noise with oil pump on start or in running | 1.There is air blockage in pump, producing noise. 2.Oil not sufficient or too much air in oil pump. |
1.Adjust openness of inlet valve. 2.Release air form oil inlet pipe. |
| Heater if on but oil temperature does not rise. | 1.Temp. sensor probe is out. 2.Poor contact of heater. 3.Circuit break. 4.Heating tube is burnt. |
1.Fix the probe; 2.Check or replace 3.Repair 4.Replace heater. |
| Vacuum drops below the rated value | 1.There is air leakage stemmed from poor joint or otherwise untightness. 2. Insufficient oil in vacuum pump 3. Dirty oil in vacuum pump 4. Air release valve or other part of vacuum pump is broken. 5. Vacuum meter does not work. |
1.Repair 2.Replenish oil to mark line 3.Replace oil. 4.Repair 5.Replace |
| It is difficult to start vacuum pump | 1. There is foreign matter in pump 2. Belt is too loose or tight or coupling goes wrong. 3. Poor power line wiring or motor goes wrong. |
1.Check ,esp. whether there is any piece of broken copper gauze of air inlet in pump. 2. Adjust 3. Repair |
| Â Â There is oil spray from air outlet of vacuum pump. |
1.There is too much oil in pump; 2.Purified oil contains too much moisture, vaporized content and foam; 3.There is too much oil in vacuum tank. |
1. Reduce oil to a little below the centerline of oil gage. 2.Open ballast valve to reduce vacuum and raise oil temp. 3.Stop machine, start oil-discharge pump to lower oil level and restart vacuum pump. |
| Purified oil is not satisfactory | water content is high; the temperature of the oil is not sufficient; filtering net is broken; the device don't clean when it is used again; the vacuum degree is low. |
increase the times of purification; improve temperature ; check and replace the filtering parts; clean; See above (the forth trouble). |
| The outlet oil is less | the oil level in vacuum tank is low; high vacuum degree; the position of the oil tank is high; there is air leakage from the oil seals of gear is . |
increase the quantity of  inlet oil ; reduce vacuum degree; reduce the height; change the oil seals. |
We have been engaged in this industry for 15 years, 11 years certified GOLD SUPPLIER by ALIBABA.
Â
For more details, contact us freely:
www.zhongnengcq.com
www.zhongnengcq.cn
sales@zhongnengcq.cn
Â
Posted by Ansen
                             Zhongneng Lubricating Oil Purifier TYA Series
Â
                                          (HOT SALE)
Application and Features
Application
The TYA series can fast degas, dewater, and remove the impurity and the volatile matter (for example ethyl alcohol, gasoline, ammonia and so on). Enhances the oil quality, restores the lubricating oil viscosity, augments the flash point and improves the operational performance. Guaranteed the hydraulic system and the dynamic system, the lubrication system normal operation, so the machine is suit for many lines, such as the mine, metallurgy, electric power, transportation, manufactures and so on. Regenerating the used hydraulic oil, lubricating oil, coolant oil, machine oil and so on.
Features
With the strong ability to filter the impurity, which can filter the particles completeTYA.
It has the back flush system, which can clear impurities automaticalTYA.
Advanced dielectric condensation device
This machine installs the new pressure protector, which can control the temperature automaticalTYA; also it can drain water on line by the water-separator device. So it is easy to control this machine.
We adopt the high quality filter materials, which has a good function in anti-corrosive, thermostable, mechanical strength. EspecialTYA, the precision of eliminates impurity is high and the service life is long. Also, it has a large volume for storing the impurities.
The unique degas and dewater system: Using the Stereo-Evaporation technical, which can separate the water and gas from the oil quickTYA by the Multi-level water-oil separation technology.
Working Principle and Structure
1. Working Principle
When it starts working, the used oil will be poured into the heater to heat under the vacuum pressure, then the heated oil enter into the primary filter which will eliminate the big impurities, then the oil enter into the vacuum separator, the oil will flow the special radiation device, which make the unit/volume oil to produce a large surface area, lets the pollution oil exposure in the low humidity atmosphere, thus the water, air and gas can be eliminated. The treated vapor and gas form the gaseous mixture becomes the liquid through the water tank and the chiller condensation, then the liquid enters water receiver together, the vacuum extracts the surplus gas.
The oil which is drained away water flow into precision strainer where can exhaust particulates (oil purification). According the quantity of the water content, a whole purification needs many times circulation to drain away the water. Â
 Â
2. Flow Chart
Technology Indexes (Table 1,Table 2)
         Table 1 Vacuum Oil Purifier Technology Standard
| Parameters | Unit | TYA-50 | TYA-100 | TYA-150 | TYA-200 | TYA-300 |
| Flow rate | L/min | 50 | 100 | 150 | 200 | 300 |
| Vacuum degree | Mpa | -0.06 ~- 0.095 | ||||
| Working pressure | Mpa | ≤0.4 | ||||
| Temperature degree | ºC | 0~100 | ||||
| Working noise | dB(A) | ≤78 | ≤78 | ≤78 | ≤80 | ≤82 |
| Electric heating power | KW | 72 | 80 | 90 | 120 | 135 |
| Total electric power | KW | 75 | 87 | 101 | 135 | 147 |
| Inlet (outlet) caliber | mm | Ф32 | Ф42 | Ф50 | Ф50 | Ф60 |
| Size | mm | 1600x1150x1700 | 1750x1150x1750 | 1900x1600x1950 | 1950x1600x1950 | 2100x1600x2000 |
| Weight | Kg | 450 | 550 | 650 | 700 | 750 |
| Viscosity index | mm2/S | GB443-89 | ||||
| Flash point(open cup) | ºC | GB443-89 | ||||
| Moisture | % | No (GB/T260) | ||||
| Mechanism impurities | % | 0.05~0.005(GB/T511) | ||||
Table2 TYA Oil Purifier Treated Guarantee Value
| Item | Guarantee indexes |
| Moisture | ≤80PPM |
| Demulsification value | New oil≤15min,running oil≤30min |
| Clean degree | ≤6 Grade(NAS1638) |
Preparation And Check
1 All spare parts of the oil purifier have adjusted before leaving factory. When the product is sent to work point, they must be checked again.
2 Oil purifier is set up stabTYA. The oil inlet is connected with the oil outlet under part of the oil tank. The oil outlet is connected the top of the oil tank.
3 Carry out electrical wiring including grounding of the machine. Check all the wire connections of the power panel, oil pump, vacuum pump and heater to ensure reliable connection and insulation.
4 Conduct a test run of the oil pump-motor to see whether it runs clockwise (viewed from the end of the motor). If not, correct the power line wiring.
5 When dealing with the hydraulic oil and other mechanic oil on-line, pls suppTYA the same brand oil properly to make sure the oil level of the oil tank normally.
Operating Procedures of Control Panel Â
For external wiring of the control panel, please refer to the Electrical Diagram. Connect the mains of 318V 3-phase 4-wire AC to the left of the panel and make sure that the panel outer casing is reliably grounded.
Turn on the main switch and the power indicator is lit up, which shows the power is on.
When heating, turn on the temperature controller, and the red light dedicates that being preparation situation. Then turn on the switch of temperature controller set the working temperature to start the heater for oil heating. When the oil temperature reaches the set value, the temperature controller will automatically turn off the heater. Therefore, automatic heating can be conducted with thermostatic effect.
After stopping operation, turn off the main switch and lock the door of the control panel.
Operating Instructions
1.Operating procedures
a) Connect the main power to the machine and link the oil inlet and outlet pipes. According to the flow chart, separateTYA close all valves (1.9.10.13.16.17), which are connected to the outside, open valves2 and 4Â (or 3Â and 5, separateTYA use two primary strainers or the two ones can be used at the same time), 6, 9Â to form an oil-filtering road.
b) Turn on the vacuum pump. When the vacuum degree reach -0.07Mpa, slowTYA turn on oil inlet valve 1in order to make the oil flow into machine.
c) Observe the oil level of the vacuum separator. When the oil level reach the floating ball controls point, open the oil ball valve12, 19.
d) Open oil pump (note: after make sure the oil outlet valve is open, the oil pump can be opened, or there may be danger in bursting of tube.), the oil is exhausted from oil outlet so the oil purifier can filter oil circulatory. Adjust oil inlet valve 1Â to make the oil output reach balance basicalTYA, which means there is level controller to automaticalTYA control.
e) When the oil have circulated normalTYA to filter in the oil purifier (the inlet oil quantity is equal with the outlet oil quantity), open heater. Set the temperature between 45-70ºC(according to the requirement), then have the oil heated in constant temperature to guarantee the vacuum separator can degas and dehydrate.  Â
f) When the oil purifier work normalTYA, open the fan on the cooler in order to have the strong wind cool the system and start work. Make sure the water vapor and gas cooling to deposit in the water receiver of the cooler.
g) After the machine has run for a long time, sampling some oil at the sampling valve to test.
h) If the water content is large and form emulsification state (emulsification oil), open the valve7 and close valve6 make the water diversion device to demulsificate and dehydrate.
i) If the oil is needed to treat deepTYA, add some chemical properTYA to have the treated oil cleaner.
  Method: add some chemical (100g) into feed hopper, and then gradualTYA open up the feed hopper valve21 to absorb the chemical into vacuum separator through vacuum automaticalTYA. After stir automaticalTYA, have the chemical into fine filter to form a compact membrane so that it can filter fine.
2.Stop Machine
When finish treating oil or need stop suddenTYA, pls as following operate:
First restore the temperature controller, stop heating, after the machine run 3-5 minutes, close the oil inlet valve 1.
Close vacuum pump, stop exhaust vacuum.
Drain away the oil in the vacuum separator through oil pump, then close oil pump.
Open the vent valve on the vacuum separator, release vacuum, respectiveTYA open water receiver valve 10,17 to let out the rest oil or water. Open the precision filter valve 13 to drain away the remind impurities. Note: after finish the operation, remember to close valves so that can be used next time.
SpecialTYA note: if face the emergence situation, press the emergence-stopping button ,then the machine is divided with power. If want to restart the machine, must run clockwise to have the emergence-stopping button restore. So that can open the various control buttons to have the machine work normalTYA.
3.Use Instruction Â
The temperature range in working is between -20~45ºC.
The altitude of the work point can affect the vacuum degree of the machine. The altitude is higher, the vacuum degree is lower.
The used oil should not be too dirty (there are many impurities), or else must use other filter device to filter firstTYA (for example: JI series portability purifier) in order to avoid the effect of dehydrates, degas or jam the filter parts.
4.Notices in operation
When vacuum pump is working, pls note the oil situation of the oil level (the oil is above the oil level). if there are much water in vacuum pump oil or the oil is too dirty, replace instantTYA to avoid influencing the lifetime of vacuum pump.
If there are much water in the cooler when running, pls drain away instantTYA. First close valve15, open valve116,17 so that the water can be drained away from valve.
Pls observe the pressure gauge. When filtering oil, if the pressure>0.3Mpa, clean purifier instantTYA or replace the filter parts.
The filter net of the primary filter should be often clean in order to avoid jamming which cause lack of inlet oil or high pressure. When the capacity of the inlet oil is fewer, it means that the impurities in the filter net are much. Pls clean the net instantTYA.
Note whether the noise of the pump and related electric motor is normal when on-line. If there is abnormal situation, pls resolve the problem right now to avoid burning electric motor and influencing the lifetime of the oil pump.  Â
n)Â Â If the machine should not be used, pls drain away the oil in vacuum pump and inject new oil.
Maintenance
1.After a certain period of running, the machine should be checked to see whether:
Â
a) The electrical control system is safe and reliable;
b) The temperature controller is sensitive, reliable and accurate;
c) Oil seals of the pump shaft are broken with leakage;
d) There is any blockage with the running system and any abnormal noise with pumps or related motors;
e) There is any air or oil leakage with the oil running system and at sealing joints.
Â
2.After each 3000 hours' running, grease shall be replenished to prevent motors from being burnt.
Â
3.Special vacuum pump oil or lubricating oil N46 should be used fro the vacuum pump and oil replaced or replenished if necessary at any time.
Â
4.If the machine will not be used over 1 month, Place the machine in a dry environment with the panel door and all valves closed, and the machine proper protected by a covering.
Trouble Shooting
| Trouble | Cause | Remedy |
| The quantity of inlet oil is less that of outlet oil when the machine runs stably | The primary filter is jammed,the resistance of the secondary filter is increased | Unpick and wash the filter,rearrange the process of the secondary purification. |
| Abnormal noise with oil pump on start or in running | 1.There is air blockage in pump, producing noise. 2.Oil not sufficient or too much air in oil pump. |
1.Adjust openness of inlet valve. 2.Release air form oil inlet pipe. |
| Heater if on but oil temperature does not rise. | 1.Temp. sensor probe is out. 2.Poor contact of heater. 3.Circuit break. 4.Heating tube is burnt. |
1.Fix the probe; 2.Check or replace 3.Repair 4.Replace heater. |
| Vacuum drops below the rated value | 1.There is air leakage stemmed from poor joint or otherwise untightness. 2. Insufficient oil in vacuum pump 3. Dirty oil in vacuum pump 4. Air release valve or other part of vacuum pump is broken. 5. Vacuum meter does not work. |
1.Repair 2.Replenish oil to mark line 3.Replace oil. 4.Repair 5.Replace |
| It is difficult to start vacuum pump | 1. There is foreign matter in pump 2. Belt is too loose or tight or coupling goes wrong. 3. Poor power line wiring or motor goes wrong. |
1.Check ,esp. whether there is any piece of broken copper gauze of air inlet in pump. 2. Adjust 3. Repair |
| Â Â There is oil spray from air outlet of vacuum pump. |
1.There is too much oil in pump; 2.Purified oil contains too much moisture, vaporized content and foam; 3.There is too much oil in vacuum tank. |
1. Reduce oil to a little below the centerline of oil gage. 2.Open ballast valve to reduce vacuum and raise oil temp. 3.Stop machine, start oil-discharge pump to lower oil level and restart vacuum pump. |
| Purified oil is not satisfactory | water content is high; the temperature of the oil is not sufficient; filtering net is broken; the device don't clean when it is used again; the vacuum degree is low. |
increase the times of purification; improve temperature ; check and replace the filtering parts; clean; See above (the forth trouble). |
| The outlet oil is less | the oil level in vacuum tank is low; high vacuum degree; the position of the oil tank is high; there is air leakage from the oil seals of gear is . |
increase the quantity of  inlet oil ; reduce vacuum degree; reduce the height; change the oil seals. |
We have been engaged in this industry for 15 years, 11 years certified GOLD SUPPLIER by ALIBABA.
Â
For more details, contact us freely:
www.zhongnengcq.com
www.zhongnengcq.cn
sales@zhongnengcq.cn
Â
Posted by Ansen
Â
Xinxiang sunrise NC equipment Limited by Share Ltd is a leading supplier of bearing CNC equipment, specializing in the production and sale of bearing rings, rolling development of CNC equipment, CNC equipment.
Xinxiang sunrise is the present domestic bearing industry equipment can provide a batch of bearing "the big three" full set of precision machining equipment enterprises, formed a super series, CNC roller bearing ring grinding, super series vertical steel ball "light, grinding, lapping" series, horizontal steel ball "light, grinding, lapping" series, high precision CNC Vertical Lathe, precision plane grinding as the representative of the complete bearing CNC equipment products to CNC Ball Bearing Ring grinding, products up to more than 150 species. Is the current domestic bearing CNC equipment manufacturing enterprises in product variety is the most professional manufacturer of complete bearing CNC equipment.
The company since its inception, always adhere to the "dedication based, personality wins" the enterprise idea, technological progress and industrial upgrading is committed to Chinese bearing equipment, in the process of continuous development, fully practice "we grow together with the company, our common development" and the customer enterprise values. Both the bearing rings CNC equipment field, or bearing rolling body "light, grinding, lapping" CNC equipment field, the company's market share in the industry.
In 1968, the company began to produce complete sets of steel ball polishing, grinding and grinding processing equipment. It has been able to process steel balls with a diameter of 1-80mm in a large cycle, and the diameter of steel balls with a small cycle can reach 280mm in actual processing.Steel Ball Processing equipment of the company's structural types, vertical and horizontal coexist, various types;There are as many as 7 kinds of ball plates, with the minimum diameter of 400mm and maximum diameter of 1000mm, and the diameter of conventional ball plates is 660mm, 800mm and 900mm.There are as many as 40 kinds of steel ball processing equipment of various specifications and types.
Grinding Ball,Steel Ball Machine,Vertical Steel Ball Machine,Horizontal Steel Ball Machine
Xinxiang Sunrise CNC Bearing Equipment Co., Ltd. , https://www.cncsunrise.com