Although the appearance of the car and the tanker is strikingly similar, there are huge differences between the two types of vehicles, from the type of announcement to the configuration requirements to the operation of the upper house. As a car model free from purchase of additional tax incentives, the liquid supply car can not only easily settle the ordinary cargo transportation license plate, but also reduce the chassis front disc rear drum, engine speed limit, European standard can, and the bottom valve in the vehicle configuration. Other mandatory additional configurations include: washing fluids, lubricating oil, additives for mixing stations, non-inflammable and explosive materials for edible oils, first-time car purchase cost (lower than that of oil tankers), and road operation management (for Liquid vehicles on the general cargo, dangerous goods on the tanker, etc. have been in a huge difference, the following we will simply distinguish between these two models, so that the majority of users choose the appropriate model according to need, avoid unnecessary expenses. Contrast between liquid supply car and tanker:
First, the shape of the vehicle: A, the liquid supply vehicle: B, tanker: Second, operation: A, for the liquid vehicle for general cargo, landing individual households or affiliated to ordinary cargo transportation companies can be. B. Tankers are dangerous goods and must be affiliated with companies that have the qualification for transporting dangerous goods. Individuals cannot be linked. Third, the driver qualification requirements: A, for the liquid vehicle driver only need to have general cargo transport industry qualification certificate. B. The tanker driver must be a qualification certificate for transport of dangerous goods, and the co-pilot must also be equipped with a escort officer (and hold a transport certificate for dangerous goods transport escorts). Fourth, the configuration requirements: A, for the liquid tanker ordinary tanker, no mandatory special requirements. This model is a national subsidy promotion model, and the upper house can be exempted from purchasing additional tax. B. The tanker is a dangerous goods transporter. According to the national regulations, the tank must be equipped with an emergency cut-off valve (subsea valve) at the bottom of the tank, a European standard tank, and an optional oil and gas recovery device and professional pipe for loading oil. The chassis of the vehicle must be equipped with a front disc rear drum and an engine speed limiting device. The upper dangerous goods transport company households, when settled by the local transport administration installed GPS system, the high cost of household ownership (this section of the car on the household about 60,000 yuan). V. Transport medium: A. The liquid transport medium for the liquid vehicle is a non-toxic, non-corrosive, non-flammable and non-explosive liquid substance such as well washing fluid, mixing station admixture, and lubricating oil. B. Tanker transport medium is flammable and explosive liquids of gasoline and diesel. Sixth, the household procedures: A, for the liquid vehicle on the need for manufacturers to provide certification, motor vehicle invoices. B. In addition to the certificates issued by the manufacturers and the invoices for motor vehicles, the households of the tanker trucks also need the local quality inspection department to issue a can inspection report and provide the product certification such as the bottom valve and the European standard can. In short, although the liquid supply vehicles and tankers are similar in appearance, there are significant differences in terms of tank structure, chassis layout, household registration procedures, operation management, and qualification management of employees. These differences also have a direct impact on the cost of the vehicle and its operating costs. Therefore, choosing a suitable model will not only save the worry but also save money. The above points are just a brief comparison of the two vehicles. For more information, please contact 13872879577 (WeChat same number)
DHK021 CNC rotor slot grinding performance characteristics: the grinding machine spindle power, good rigidity, stable precision, which can realize the wireless control of motor speed;The grinding parts surface quality is high, stable precision.It is mainly used for grinding blade pump rotor slot.Machine adopts horizontal installation parts, grinding groove grinding wheel moves up and down, for wide type rotor, the rotor can be moving to and fro along the channel direction improve the machining precision of the groove.According to different parts of material, optional different grinding wheel material and matching technology, to greatly improve the machining efficiency and machining precision of parts.
CNC Rotor Groove Grinder,Auto CNC Rotor Groove Grinder,High Speed CNC Rotor Groove Grinder,CNC Rotor Groove Grinder Machine
NingXia DaHe Machine Tool (Group) Imp And Exp Co.,Ltd , https://www.nxdhjcmachine.com