1. The chiller adopt high-quality compressor and Italy pump, so it is very sate and noiseless, economical in power and durable
2. The chiller is deployed with Italy temperature controller, it can control the temperature between 3 and 35 degrees exactly
3. The designs of chiller and radiator are unique, so the heat exchange efficiency is very high
4. The chiller is designed to be with current over-load protector, high voltage and low voltage construction and electric time-delay safeguard, when malfunction happened, it could alarm and show the cause of the problem in time.
5. It has stainless steel temperature-holder box, it is very convince to purify
6. It is designed to be with anti-phase & lack-phase protector and anti-icy protector
7. The temperature of ultra cod chiller can be below -15 degrees.
8. This series chiller can customize base on the requirement of acid resistant & acidity-resistant
9. It has got CE certification.
                                        Industrial Air Cooled Chiller | |||||||||||||
 Model HLLA ~ | 03SI | 05SI | 08SI | 10SI | 12.5SI | 15SI | 20DI | 25DI | 30DI | 40TI | 45TI | ||
Rated Cooling Capacity | ×1000 kcal/h | 7.9 | 12.8 | 20.8 | 27.9 | 32.3 | 40.8 | 55.7 | 64.7 | 81.5 | 97.0 | 122.3 | |
KW | 9.2 | 14.9 | 24.2 | 32.4 | 37.6 | 47.4 | 64.8 | 75.2 | 94.8 | 112.8 | 142.2 | ||
Input Power (KW) | 3.85 | 5.55 | 8.15 | 10.4 | 12.0 | 16.0 | 20.1 | 22.5 | 31.2 | 33.7 | 45.7 | ||
Comp. Input Power×Qty. (KW) | 2.6 | 4.3 | 6.35 | 8.1 | 9.3 | 12.5 | 8.1×2 | 9.3×2 | 12.5×2 | 9.3×3 | 12.5×3 | ||
 Chillded Water Pump Model | HT1.0DK-20 | HT1.0DK-20 | HT40-15 | HT40-15 | HT50-17 | HT50-17 | HT50-17 | HT50-17 | HT65-19 | HT65-19 | HT65-19 | ||
 Chilled Water Pump Power (KW) | 0.75 | 0.75 | 1.1 | 1.1 | 1.5 | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 2.2 | ||
 Comp. Current (A) | 6.8 | 10.5 | 14 | 17.5 | 20 | 25.6 | 33.8 | 37.2 | 49.8 | 55.8 | 72.6 | ||
Power Supply | 3φ-380V-50HZ | ||||||||||||
 Safety Protection | Phase reversion protection, Phase lack protection, Overload current protection, Discharge air temp. protection, Low & High pressure protection, Low temp. protection, Water flow protection, |
||||||||||||
 Number of Refrigeration Circuit | 1 | 2 | 3 | ||||||||||
 Capacity Control (%) | 0, 100 | 0, 50, 100 | 0, 33, 66, 100 | ||||||||||
 Refrigerant | R22 | ||||||||||||
 Condenser | Ripple Aluminum Fins around Cooper Pipe | ||||||||||||
 Power lnput of Fan (KW) | 0.5 | 0.5 | 0.7 | 1.2 | 1.2 | 2.0 | 2.4 | 2.4 | 4.0 | 3.6 | 6.0 | ||
 Evaporator | Pipe Coil Type |  Shell and Tube Type | |||||||||||
 Water Side Max Pressure (MPa) | - | 1 | |||||||||||
 Dia.of Pipe to Evaporator (inch) | 1" | 1-1/2" | 2" | 2-1/2" | |||||||||
 Chilled Water Flow (L/m) | 26.4 | 42.7 | 69.4 | 92.9 | 107.8 | 135.9 | 172.0 | 194.8 | 272.2 | 292.2 | 408.3 | ||
 Evaporator Water Pressure drop (kPa) | - | 17 | 23 | 28 | 30 | 28 | 28 | 32 | 32 | 31 | |||
 Running Noise dB(A) | 72 | 72 | 73 | 75 | 75 | 75 | 75 | 75 | 75 | 75 | 75 | ||
 Tank Volume (L) | 80 | 80 | 180 | 180 | 180 | 180 | 270 | 270 | 270 | 270 | 270 | ||
 Total weight (Kg) | 130 | 170 | 430 | 480 | 510 | 560 | 840 | 880 | 980 | 1130 | 1280 | ||
 Dimension L×W×H | 1000×650×1500 | 1500×1100×2200 | 1500×1180×2200 | 2200×1180×2200 | 3200×1180×2200 |
Aluminum Die Casting Transplanter Housing is a metal forming process in which molten aluminum metal is put under pressure and injected into a die. Aluminum Die Casting Transplanter Housing are lightweight alloys that have good corrosion resistance, mechanical properties, high thermal and electrical conductivity and strength at high temperatures. Aluminum alloys possess high dimensional stability for complex shapes and thin walls.
Aluminum Die Casting Transplanter Housing is efficient and economical and offers a wide range of durable shapes and components. Little or no machining is required after a part is die cast, because the process provides very close tolerances for even complex shapes. Aluminum die castings can also be easily plated or finished. Aluminum die castings are dimensionally stable and heat resistant.
Aluminum Die Casting Transplanter Housing
Transplanter Machine, Aluminum Transplanter Housing, Aluminum Housing
Ningbo Zhenhai Xinxie Machinery Co.LTD , https://www.xinxie-diecasting.com