6 Cavities Full Automatic Pet Bottle Blowing Making Mold Machine

Model NO.: ZG-6000
Plastic Processed: Full Automatic Pet Bottle Blowing Machine
Voltage: 380V/3pH/50Hz
Power: 35kw
Capacity: 6000 Bph for 500ml
Warranty: 1-2 Years
Cavity: 6 Cavities
Container Volume: 0.1-2L
Mould Material: 7075aluminum
Weight: 4000kg
Clamping Stroke: 125mm
Trademark: ZHENGGE
Transport Package: PE Film Inside Then Wooden Case Outside Packing
Specification: 4.05*2.2*2.3m
Origin: Taizhou Zhengjiang China
HS Code: 8477309000
6 Cavities Full Automatic PET Bottle Blowing Making Mold Machine (ZG-6000)
INTRODUCTION:
ZG6000 is a high speed blow molding machine which is developed and manufactured by our Company using the most advanced bottle blowing technology in the world. Owing to the machine's high degree of automation, high production efficiency, high safety, high stability and reliability, the products made will not be contaminated in any intermediate steps, and it can be matched up directly with the production line of filling and can be widely used in production of mineral water, carbonic acid beverage, juice, tea and heat-resistence bottle product. Machine Settings of PET Bottle Blow moulding machine
1) PLC colour display: MITSUBISHI(JAPAN)
2) Pneumatic parts: FESTO(GERMANY)
3) Value: FESTO (Germany)
4) Other electric parts are all world-famous brand

Machine Featuers of PET Bottle Blow moulding machine
1. Stable performance with advanced PLC.
2. Conveying preforms automatically with conveyor.
3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mold.
9. Two ways of operating: Automatic and manual.
10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
12. Contamination is avoided for the bottle body.
13. Ideal effect of the chilling with the chilling system.
14. Easy installation and starting
15. Low rejection rate: Less than 0.2 percent.
 
Model ZG-6000
Output Based on bottle shape 5200-6000pcs/hr
Product Specifications Diameter range 18-38mm
Container diameter 115mm
Container height 350mm
Mold Specifications Cavity 6 cavities
Clamping force 48000kg
Clamping stroke 125mm
Stretching stroke 350mm
Machine Power Power Voltage 380v 3Phase /220v 3Phase  50/60HZ
Installed power /Actual power 70kw/35kw
Air Source High pressure air compressor 3.6m³/min 30Kg
Low pressure air compressor 2.0m³/min 12Kg
Air dryer 3.0m³/min 30Kg
Blowing machine size Length*width*height/weight 3700*2050*2200mm/4000kg
Preform loader size Length*width*height/weight 2000*1350*2550 mm/550kg
 
Our Service:
Pre-servise                                                                               
* Welcome to view our Factory.                                                               * 24 hours on line anwser your question.                                                 
* Help client choose the suitable machine.                                              
* Take video as client's request.                                                             
* Take client's other need into consideraion.
After-service
* Training how to instal the machine, training how to use the machine. 
* Engineers available to service machinery overseas.
* We provide useful documents with machine.( Machinelayout, Electricity diagram,Machine certificate, General manual book/maintenance book)
* All spare parts are always available and free for your request in first year.  
              
Packaging & Delivery:
PE Film Inside Then Wooden Case Outside Packing For ZG-6000
Delivery Detail:
20 Days after payment
 

What products are suitable for High-end Gift Tags:

        High-end gift tags are mainly used for some high-end gift products, such as sea cucumbers, wine, tea, health products and other products will use high-end gift tags, because of their exquisite workmanship, they are currently more popular.


Material of high-end gift tags:

        The material of high-end gift tags is basically made of special paper, and this kind of label has at least one special process, such as bronzing, bump, UV, embossing, etc., special paper plus special process It makes an ordinary label look like a luxury product, which can only be described by the word perfect!

High-end Gift Tags

Rongdian Printing Products Co., Ltd.:
       Shenzhen Rongdian Printing Products Co., Ltd. is located at 303, 3rd Floor, Building 2, Potoudu Industrial Zone, Longxi Village, Longcheng Street, Longgang District, Shenzhen, Guangdong Province, China. It mainly deals in various printing products: stickers, product color boxes, exquisite gift boxes, picture albums , Promotional color pages, trademark tags, envelope receipts! Shenzhen Rongdian Printing Products Co., Ltd. adheres to the production philosophy of "printing every product with heart" and strictly implements it! Looking forward to your visit~

High-end Gift Tags

High-end gift tag customization, high-end gift tag printing, high-end gift tag manufacturers

RONG DIAN PACKAGING & PRINTING CO.,LIMITED , https://www.rodiantpackaging.com

Posted on