It is suitable for conveying lubricating oil or similar lubricating oil without solid particles and fibers, non-corrosive, with temperature not higher than 80 ℃ and viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) Other liquids as well as for hydraulic turning systems.
Application range
In the oil delivery system can be used as transmission, booster pump;
In the fuel system can be used as delivery, pressure, jet fuel pump;
In the hydraulic transmission system can be used as a hydraulic pump to provide hydraulic power;
In all industrial fields, can be used for lubricating oil pump;
Structural features
This series of gear pump gear, shaft, pump body, pump cover, bearing sleeve, shaft seal and other components. Nitriding gear has a higher hardness and wear resistance. Install with shaft in replaceable sleeve. The lubrication of all parts in the pump is automatically achieved by the use of conveying medium while the pump is in operation.
Pump bearing within the four floating installed in the pump, with the work of pressure automatically adjust the size of the gap between the end, so the pump pressure stability, the output flow pulsation, the high efficiency of the solution.
From the spindle extension to the pump to see, clockwise rotation.
The main purpose of poultry chilling is to suppress the development of pathogenic microorganism and spoilage microorganism. Many researches show that the two microorganisms on the surface of carcass are largely reduced after chilling process. There are two main chilling method: water chilling and Air Chilling. At first, people tend to adopt air chilling in the chicken plucking process, instead of immersed chilling and drum-type chilling, for the consideration of chilling speed. While the modern research data doesn't support this point, and it shows that the chilling speed may affect the flavor, quality and appearance of meat, and shock chilling will cut down the meat quality, and slow chilling will cause PSE meat.
in Water chilling area, it contains water screw chiller, and water cooling units(water cooling system or Ice Flaker).for wather cooling units,it is for lower the temperature of water in the Screw Chilling, so that when pre-chilling the chickens, it can keep chickens in low temperautre(4-10°C),but different water cooling units have different effect.
also you can choose CONNECT Air chilling line. It is in one room,like a cold room. one automatic conveyor line is moving from outside to another side.and in this room,it is equiped with cold room equipment.
Screw Chilling, Air Chilling, Chicken Water Pre-Chilling, Chicken Air Chilling
Connect Group For Poultry Project , https://www.connectpoultry.com